AzureFilm

AzureFilm And if you have any questions feel free to reach out to us at [email protected]
(2)

Manufacturer of High Quality 3D Printing Filaments
• Join our Community
• Made in Europe 🇪🇺

For more information and to explore our range of products, visit azurefilm.com.

25/08/2026

Batch 3D prints failing? Start with a 4-part test run to simulate production, dial in orientation and brim settings, and optimize slicing before scaling up.

For dependable batch printing, high-quality filament is non-negotiable. Consistent material helps you achieve predictable flow, reliable first layers, and repeatable results. AzureFilm filaments are a great choice when quality and consistency matter.

A clean build plate is just as important. Wash it with soap and water to remove oils and residue, run a full-plate cleaning print, recalibrate, then start your long batches with confidence. If adhesion still isn’t consistent, try an adhesive such as 3D Lac—you may even be able to skip the brim.

Every saved hour and every 100g of filament matters when you’re printing at scale. Happy printing! 🖨️

20/08/2026

How to solve Color bleed in 3D printing?

It isn’t always a purge-volume problem and a multi-nozzle printer won’t necessarily fix it either. 👀

The real culprit is often light transmission: light can pass through thin printed layers and reveal darker filament underneath. That same effect is what makes CMYK lithophanes look so impressive—but it can create unexpected shadows in regular prints.

In this sliced model, the black walls extend underneath the eye and skin-color surfaces. With only a few top layers above them, the black filament shows through, making it look like color bleed. The solution? Rotate the model so the eyes and skin receive enough material depth in the correct direction.

Matte filaments can conceal underlying colors a little better, but even they can let darker colors show through when the outer surface is too thin.

Did you know this about multi-color printing? Comment what you learned and happy printing! 🖨️✨

19/08/2026

Don't panic!

This affects only the black Azurefilm filament spools, the Master Spools are fully compatible ✅
Happy printing 👍

18/08/2026

Upgrade your Apple Watch charger!

Which of these 3D printed Apple Watch charging stand designs look good and makes charging effortless?

Because charging your Apple Watch shouldn’t mean fumbling with a loose magnetic puck every night.

Would you print the practical cable-management stand, an aesthetic display stand, or somehting else? And which filament would you choose: PLA, silk PLA, PETG, matte black, or something colourful?

13/08/2026

(Part 2/3) Which is your favorite Silk Multicolor 3D filament? Let us know!

13/08/2026

(Part 1/3) Which is your favorite Silk Multicolor 3D filament? Let us know!

13/08/2026

(Part 3/3) Which is your favorite Silk Multicolor 3D filament? Let us know!

12/08/2026

Different textured build plates can completely change the look of your first layer in 3D printing. From smooth, clean finishes to subtle patterns and deeper textures, the surface you print on can add a whole new visual effect before the print is even finished. ✨

That’s what makes textured build plates so fun to experiment with — they don’t just help with adhesion, they also give your prints a unique first-layer finish straight off the bed. If you’re into 3D printing details, this is one of the easiest ways to make your prints stand out.

11/08/2026

Our only fan needed a big brother. Scale changes everything 👇

I kept thinking… how would it sound? How much air could it actually move?

Piece by piece, it came together. The same clever ratcheting mechanism, only louder, sharper, more alive. You can feel it in your hands before you even hear it.

And when it finally spun.

Did the boys love it or hate it?

The kind of design that reminds you how creative this community really is.

So… are you a fan?

10/08/2026

See details on the drying process 👇

PLA Original, PLA Glitter, PLA Lumos, PLA Matte, PLA Silk, PLA Strongman, Lumberlay : 4h @ 50°C
PLA Transparent, PLA+:
8h @ 50°C

PLA CF:
6h @ 55°C

PETG Original, PCTG:
6h @ 65°C

PETG Transparent, PETG CF :
8h @ 65°C

ASA Original, ASA Prime, ABS-P, ABS Prime:
6h @ 80°C

PC ABS:
6h @ 90°C

TPU:
12h @ 50°C

Even brand new filament sometimes needs to be dried!

Happy printing 💪

Adresse

Ludwig-Erhard-Anlage 1
Frankfurt
60327

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von AzureFilm erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Verknüpfungen

Teilen